Recent content by ilcibernetico

You can find all there : http://hardforum.com/showthread.php?t=1527751&page=3

Personally think that the first step of cooling may be only a fan that sucks air from the top of the monitor directed outwards. Without making any drastic changes, a single fan eject most of the heat generated.

The ALTERA chip is in direct contact with the heat sink. I reused the TIM only to counteract the pressure generated from the heat sink and also dissipate the heat generated from the opposite side of the PCB.... The power supply instead has a small cooling fin on the inside that combined with...

I followed the advice of rtangwai and I installed an additional fan to expel the air generated by the power supply and ensure proper air circulation. I chose to use a silent 120mm fans Noctua placing it over the power supply : I drill the hole with the jigsaw, T118B blades and CRC...

The realization was not difficult, it is enough for a jigsaw and a few other tools. First serves an aluminum plate or anticorodal 5 mm thick. It is mportant that the thickness is 5mm for exactly the heatsink firmly against the chip. I did some tests with different thicknesses. I colored the...

Hello, today I installed the cooler recovered from a video card. The cooler is a ZALMAN VF1000. First I made ​​an opening in the cage and original and then I built two aluminum brackets shaped with a thickness of 5mm : I later used the mx2 thermal paste to get a better heat...

Sorry for my english.... I tried the repair welds To pass gradually from 210°C to 50°C in two minutes, I have distanced gradually warm gun from the chip and at the same time I have made several step down by lowering the temperature of the gun.

After reading many forums, I decided groped heating the chip to restore the welds: I covered with NOMEX the components adjacent to the ALTERA chip I made a "bowl" of the aluminum foil tape from 3M I have fixed a thermocouple above the chip to monitor the temperature...

Hello, i'm Italian and i have a Syncmaster 305T. I wanted to compliment the forum that helped me repair my monitor:D A few days ago it appeared green artifacts on screen: