newls1
Supreme [H]ardness
- Joined
- Sep 8, 2003
- Messages
- 4,607
LEt me start off an state that ive never had a cooling issue EVER... been watercooling everything since the late 90s and this is the first time im clueless and need help. Here is the exact issue im having:
My 3950x is cooled with the following components..... EK 60mm thick 420mm rad in push / pull using very well known yate loon fans. Heatkiller PRO IV all copper waterblock for AM4, D5 pump/res combo ... all 150% proven parts and actually pull outs from another build in my pc room.
Current OC on my 3950x is all core 4.35Ghz @ 1.3125vcore / 1.1 SOC and as soon as I load aida64 stress test, cpu spikes to 92/93c in a 21c room. Here is the suspicious part..... As soon as I "END" the stress test, the temps SLOWLY drop down, like 90-88-80-75-73-70-65- etc... over about a 15sec time frame. Never have I seen this, ive ALWAYS had it when I stop a stress test, the temps immediatly drop to mid 30's or 20's, etc... not over a 15 sec time frame. So this tells me a bad mount. so i confirmed mount a few times and the mount is full contact with tons of pressure. So do amd cpus read core diode temps differently then intel and this is normal behavior, or is there possibly something else at fault here. Heatkiller blocks have never let me down, but im not ruling this out. was thinking about picking up a EKWB velocity at microcenter to "TRY" to see if this has different results but that is an expensive 110$ "try"....... help please? whats your input.... thank you
My 3950x is cooled with the following components..... EK 60mm thick 420mm rad in push / pull using very well known yate loon fans. Heatkiller PRO IV all copper waterblock for AM4, D5 pump/res combo ... all 150% proven parts and actually pull outs from another build in my pc room.
Current OC on my 3950x is all core 4.35Ghz @ 1.3125vcore / 1.1 SOC and as soon as I load aida64 stress test, cpu spikes to 92/93c in a 21c room. Here is the suspicious part..... As soon as I "END" the stress test, the temps SLOWLY drop down, like 90-88-80-75-73-70-65- etc... over about a 15sec time frame. Never have I seen this, ive ALWAYS had it when I stop a stress test, the temps immediatly drop to mid 30's or 20's, etc... not over a 15 sec time frame. So this tells me a bad mount. so i confirmed mount a few times and the mount is full contact with tons of pressure. So do amd cpus read core diode temps differently then intel and this is normal behavior, or is there possibly something else at fault here. Heatkiller blocks have never let me down, but im not ruling this out. was thinking about picking up a EKWB velocity at microcenter to "TRY" to see if this has different results but that is an expensive 110$ "try"....... help please? whats your input.... thank you