shadow2761
Limp Gawd
- Joined
- Mar 11, 2016
- Messages
- 455
Just built new rig:
Corsair 500D SE RGB
EVGA SuperNova P2 1000w
ASUS Strix ROG Z390-E
i9-9900K
Corsair 115i Platinum
16GB Gskill DDR4 @ 3600 C14
MSI RTX 2080 Ti SeaHawk X @ 2050MHz
Samsung EVO 970 PLus
Samsung 850 PRO
Trying to OC this 9900k to 5GHz, in CoreTemp and HW64 it shows 5Ghz some times but when I do any stress testing it goes down to 4.6GHz and stays there. How do I get it to stay at 5GHz when it is under load and not just randomly under no load, as it seems to be?
I have basically done this so far:
1) Enable XMPII for RAM
2) Set CPU Core Ratio to "Sync All Cores" and set the multiplier to 50
3) Disable ASUS Multi Core Enhancement
4) Disable CPU SVID
5) in "External Digi+ Power Control" set Loadline Calibration (LLC) to level 6, and CPU Current Capability to 140% (the max I could see?)
6) Set CPU Core/Cache Current limit to max
7) Change CPU Core voltage to Manual, 1.29v
8) Go to "Internal CPU Power Management", set both Short Duration and Long Duration Power Limits to max (4095)
So far max temps I have seen on CPU is 60-70°C
Am I missing something?
Corsair 500D SE RGB
EVGA SuperNova P2 1000w
ASUS Strix ROG Z390-E
i9-9900K
Corsair 115i Platinum
16GB Gskill DDR4 @ 3600 C14
MSI RTX 2080 Ti SeaHawk X @ 2050MHz
Samsung EVO 970 PLus
Samsung 850 PRO
Trying to OC this 9900k to 5GHz, in CoreTemp and HW64 it shows 5Ghz some times but when I do any stress testing it goes down to 4.6GHz and stays there. How do I get it to stay at 5GHz when it is under load and not just randomly under no load, as it seems to be?
I have basically done this so far:
1) Enable XMPII for RAM
2) Set CPU Core Ratio to "Sync All Cores" and set the multiplier to 50
3) Disable ASUS Multi Core Enhancement
4) Disable CPU SVID
5) in "External Digi+ Power Control" set Loadline Calibration (LLC) to level 6, and CPU Current Capability to 140% (the max I could see?)
6) Set CPU Core/Cache Current limit to max
7) Change CPU Core voltage to Manual, 1.29v
8) Go to "Internal CPU Power Management", set both Short Duration and Long Duration Power Limits to max (4095)
So far max temps I have seen on CPU is 60-70°C
Am I missing something?