The [H]ardForum Perpetual Freebies Thread

Just pay shipping.

- Meraki MR12-HW with power supply. BNIB Free.
- TRENDnet TEW-751DR N600 Dual Band Wireless Router IEEE 802.11a/b/g/n, IEEE 802.3/3u. Used once for an hour when I reconfigured a network setup. Limited wireless settings but it does work decently.
- i5 2520M processsor
 
Here is something far fetched, some one gave me a imac late 2011 with a bad video card.. Does anyone have any solutions that do not involve baking card or buying questionable card from questionable source? ;)
video card is a Radeon HD 6970m 1GB
 
I thought I had that. I found a Micro-usb to 30 pin adapter and a 30 pin extension cable. But not exactly what you are looking for.
 
I have some old stuff my wife needs me to get out of the house...before I bring it to best buy to recycle...
You pay shipping
EVGA GTX 285 SC (EVGA 01G-P3-1285-AR) pulled from a working system
ASUS P4G8x Deluxe motherboard. Still has the p4 3.06 seated in it and a gigabyte cooler..I have a x800xt aiw agp card for this too and I think also a 9700 pro maybe. I have pc133 ram..so much ram...
Edit: everything is presently claimed 3 deep :)
 
Last edited:
I have some old stuff my wife needs me to get out of the house...before I bring it to best buy to recycle...
You pay shipping
EVGA GTX 285 SC (EVGA 01G-P3-1285-AR) pulled from a working system
ASUS P4G8x Deluxe motherboard. Still has the p4 3.06 seated in it and a gigabyte cooler..I have a x800xt aiw agp card for this too and I think also a 9700 pro maybe. I have pc133 ram..so much ram...
sure someone will grab all that quick. If I still had an AGP slotted system I would love that AIW.
 
I have some never/barely used 140mm molex powered fans for shipping costs. They were pulled from a chassis that I replaced with 3pin fans.

I'm looking for Antec HCG (Bronze) GPU/SATA connector if anyone has lying around.
 
Looking for a few heatsinks that comes stock when you buy a CPU retail. Doesn't matter what generation of CPU. Willing to pay shipping.
I have a stock INTEL cpu cooler in original package. Never used. It's a intel e30307 fan with a bracket for socket 775 CLAIMED
 
Last edited:
I have:

Old network equipment:
Linksys WRT160N running old DDWRT
Netgear WNDR3700v2 running old OpenWRT
TP-Link TL-SG105 5 port gigabit switch


Free plus shipping to a good home.

4x 2.5" 7200RPM 500GB drives (7mm height) - Toshiba MQ01ACF050 CLAIMED by mnewxcv
2x 2.5" 7200RPM 500GB drives (7mm height) - Seagate ST500LM021 CLAIMED by mnewxcv
 
Last edited by a moderator:
I have:

Old network equipment:
Linksys WRT160N running old DDWRT
Netgear WNDR3700v2 running old OpenWRT
TP-Link TL-SG105 5 port gigabit switch

Storage:
4x 2.5" 7200RPM 500GB drives (7mm height) - Toshiba MQ01ACF050
2x 2.5" 7200RPM 500GB drives (7mm height) - Seagate ST500LM021

Free plus shipping to a good home.
I'd love the 4 toshibas. PM incoming.
 
Still have the following:
- Meraki MR12-HW with power supply. BNIB Free.
- TRENDnet TEW-751DR N600 Dual Band Wireless Router IEEE 802.11a/b/g/n, IEEE 802.3/3u. Used once for an hour when I reconfigured a network setup. Limited wireless settings but it does work decently.
- ~8x 2.5" Dell drive caddies from a R710/R720. Just pay for shipping.

I will junk the Meraki and Dell caddies end of week.
 
Probably a stretch but does anybody have a low end CPU for socket 1151 Z170?

I was given an Asus Z170 Pro Gaming with bent pins + 1 broken pin. I've straightened the pins out the best I can manage with and the broken pin seems to be labeled RSVD, which to my understanding is probably not even connected to anything. I don't want to invest in a good CPU for it though just to find out its toast, so may just put it on ebay as-is or something otherwise.
 
Ok...I'm not sure what it costs to ship a power supply but here goes...

I have two power supplies that worked when i removed them
Antec SL350 Smart Power with smart blue (Blue LED fan) CLAIMED
https://www.newegg.com/p/N82E16817103913
Pulled years ago from a working P4 system...Bought this when I upgraded my old armarda 5670 from the Rage LT Pro to a Ati 9700pro and needed the juice...

I also have a
Thermaltake Silent Purepower W0014RU 480W ATX12V Active PFC Power Supply This still has the 5.25 fan speed controller and I might still have the additional pci slot mounted fan controller. CLAIMED
https://www.newegg.com/p/N82E16817153007
This power supply was great because you could turn the PSU fan speed way down and it stayed super quiet. If it needed more cooling it would override and turn back up...

This was pulled from my last working p4 system when I retired it. It was working then. It ran an oc'd p4 3.06 and an AIW x800xt...

I also have a
Sunbeam RHK-BA Rheobus 5.25" Bay 4 Channel 20W Fan Controller Panel (Black) CLAIMED
https://www.newegg.com/p/N82E16811998808
This is a 5.25 4 header single molex input fan controller...ahhh the quiet of a p4 gaming rig maxed out with 4 120mm fans ramping up to 1200rpm while gaming with headphones...Gotta play my DOD in the heat!
This has LED's that light up I think blue if the fan is on but less than 600rpm and then Red if it's over that rpm

paypal for shipping only.
 
Last edited:
Still have the following:
- Meraki MR12-HW with power supply. BNIB Free.
- TRENDnet TEW-751DR N600 Dual Band Wireless Router IEEE 802.11a/b/g/n, IEEE 802.3/3u. Used once for an hour when I reconfigured a network setup. Limited wireless settings but it does work decently.
- ~8x 2.5" Dell drive caddies from a R710/R720. Just pay for shipping.

I will junk the Meraki and Dell caddies end of week.

How much to ship the TRENDnet wireless router to zip 97813?
 
I have an AMD R9-270 that I am giving away for the cost of shipping GONE to SamirD
Sorry Mode13 SamirD was the first one to PM me I read the times wrong :notworthy:

I pulled it out about a week ago as I moved to a 4K capable HTPC type card (GT-1030) as I don't game much anymore. The card works fine but I am only giving away the actual card, I did not get any accessories when I was given the card.

AMD_R9270-1.jpg

AMD_R9270-2.jpg

AMD_R9270-3.jpg



I am in need of the low profile bracket for an AMD HD5450 video card, I had it but I gave it away (On this forum years ago) and now I need it. (That is the way it works I guess LOL!) No Longer Needed



IMG_0071.jpg
 
Last edited:
PMed about the 270, assuming lots of messages came flying in for that one though :p
 
Actually you were the first one to PM me about it so it is yours
I just did the same thing with my HTPC.... years ago it was my gaming rig with a q9550 and a gtx 285 ($409.99 when I bought it and I gave it away here :) )...and the power supply went so I decided to swap out the human torch card for something more economical...I too chose the DDR5!! GIGABYTE GeForce GT 1030 GV-N1030D5-2GL Low Profile 2G Computer Graphics Card. Now it's whisper quiet and I can do 4K :)
 
Hello guys,

I don't know if this is allowed but I have a Noctua NH-L9a that I'd like to trade for an NH-L9i. The heatsink itself was never used. I bought it for the fan when I had the dan dan a4. I just bought a deskmini 110 and I don't have the mounting for intel. I would also be open to swap the bottom 115x arms if anyone has an NH-L9i that they used for an am4 build.

I will send mine out first.

Thanks.
 
Hello guys,

I don't know if this is allowed but I have a Noctua NH-L9a that I'd like to trade for an NH-L9i. The heatsink itself was never used. I bought it for the fan when I had the dan dan a4. I just bought a deskmini 110 and I don't have the mounting for intel. I would also be open to swap the bottom 115x arms if anyone has an NH-L9i that they used for an am4 build.

I will send mine out first.

Thanks.
The FS/FT section is for that. Emphasis on the FT.
 
Looking for:

Socket 370 CPU Cooler w/ fan
2x 256mb sticks pc100
1x PCI video card
1x PCI Network card
 
I have a gtx 560 ti, but I don't have time to really pack and ship lately so local pickup/meetup for now. 30052
 
Just so you know they usually fit in the $8 quick ship USPS boxes...$8 anywhere in the US.
I’m just always slow to get around to it (not a lot of free time to squeeze in a usps visit during regular hours). It’s a pretty big card so it’d take a larger flate rate which I’d have to go get or order...samir offered to send me a prepaid label so if no one claims by the time I’m off on Saturday, I’ll dig up a box and do it that way.
 
Back
Top