How to get Wattman to auto-apply?

[LigTasm]

I was wondering if any of you fellow AMD users figured out how to get Wattman to auto-apply settings at startup?

If left completely alone, my V56 seems to be set up with a different HBM speed every boot (sometimes 700, sometimes 800, I've seen 500 a few times as well).

I have a profile with the card undervolted on the core and the HBM and power limit pumped up a bit, but I rarely remember to open up the damned app and apply it. Is there an option I'm missing that does this or does everyone go through this annoyance? I really like the wattman program otherwise.

 

[Mega6]

Radeon Settings -> Global Settings -> Global WattMan Tab -> Load/Save Profile Upper Right
make sure you can write to C:\Users\%USERNAME%\AppData\Local\AMD\CN dir and files.

edit - and dont set the power limit.

 

[LigTasm]

Radeon Settings -> Global Settings -> Global WattMan Tab -> Load/Save Profile Upper Right
make sure you can write to C:\Users\%USERNAME%\AppData\Local\AMD\CN dir and files.

edit - and dont set the power limit.

Does it only load on startup if you don't set the power limit? My card is under water and I see an extra 60-80mhz with the power limit +50%.

 

[d8lock]

I have the same question. Having to manually apply a profile for each card at startup is pretty damn inconvenient.

 

[Mega6]

Does it only load on startup if you don't set the power limit? My card is under water and I see an extra 60-80mhz with the power limit +50%.

power limit was affecting my testing. play with it last.

 

[Mega6]

I have the same question. Having to manually apply a profile for each card at startup is pretty damn inconvenient.

see above.