Anyone know how do you properly test a SX600 without it having a standby switch to turn it on/off? Would the standard black/green wire paperclip method work for this PSU? I built my Ncase M1 and the motherboard would not boot. I have an ASUS Impact VII motherboard and when trying to power on, only the 'Power' button on the motherboard would light up and the motherboard's IO panel's reset button lights up too. No peripherals would start or anything.
I tried hooking up a PSU tester to the 24pin connector and got nothing (hence the question of how to properly test this PSU since it gave no readings but yet some basic lights and etc were lit on the mobo). Want to verify if it is a bad power supply or bad mobo
I tried hooking up a PSU tester to the 24pin connector and got nothing (hence the question of how to properly test this PSU since it gave no readings but yet some basic lights and etc were lit on the mobo). Want to verify if it is a bad power supply or bad mobo