Total overview of the case how he's now.
Most of the cables are on/in it : audio, usb, powerswitch, hdd led, power led, reset, reset led, debug lcd, 2 sata, all atx and pci kabels.
Evga PSU is also on his place together with the dual bay psu in front :
overview of mobo with all cables on it :
Also i have made a cable for the EVbot connection in the mobo IO-Shield, so the connection will be in the front plate, where it's easier to acces to hook up the EVbot :
Total overview of the current cables in the case lols,
but they are not all the cables yet, and need also some controllers to put there
(coolit, koolance, poweruse) :
I cut up an Evga ECP Panel for building it in the front of my case.
little soldering, and i will have a EVbot connecting in front, a DEBUG lcd, Clear CMOS switch and switches for disable PciE and cpu's.
This will be build in a Lian-Li slim-drive Bracket where together with a slot-in dvd drive also can go two SSD harddrives in it :
i cut the ECP Panel up because you see always mods with just the ECP Panel screwed in the case, now i change this to my own taste.
Here is the Lain-Li slim dvd drive bracket,
(bought in usa)
Here you see how i build in all the different switches, lcd en connectors, these will come behind a grey smoke acryl plate :
Clear CMOS with his tiny hole :
Total overview of the case :
In the case it's still dark, but also on the graphics cards will come nice mods etc......:
the Evga ECP Panel of Classified mobo's, i cut it in pieces,
And this is what i did with those pieces, i only whanted to use the Clear CMOS button and the debug lcd,
also i enlarged the connectors in the IO-Shield of the Evga EVbot to the front plate for easy acces.
There still needs to come a slim dvd drive slot-in and a grey smoke front plate :
habe taken the front panel connector of my old intel skulltrail mobo (dremel in mobo)
And used this connector in my slim drive bay of lian-li, together with the ECP panel i cutted up,
so that i can hoop up the ECP panel cable of mobo in my dvd drive,and from here everything will be splitted to debug lcd, power and reset switches and cpu/PciE disabled switches
and hhere you see it, connector for ECP panel connector that comes from mobo, and connector for power and reset switches :
also the halve of the cables is managed, have some more cables to do and connectors to solder.
Have also the Koolanc TMS-200 controller build-in the case and hooked up the first cables and sensors
In terms of pics vs real life, is it easier to see through the plexi cause it's a shame to cover up so much of that detail work by having it so hard to see through!
i'm still waiting on some small packages to arrive:
Sata slim line dvd RW drive :
Sata slim drive adapter to normal sata :
adapter on it screwed :
red smd-led strips for some light inside the case :
3x Nexus air-beamers for 80/92mm fans, also here comes a nice mod with in the case,
also some 3mm led's , 1 for the freezone V1 cooler, the other one is for in SB of Mobo full cover block instead of the stock blue led's :
Everything looks great so far. My only comment would be to maybe look in to light diffusers for the LEDs. I think it would look much better to have the entirety of the red strips glowing, instead of having a mild glow and readily apparent LEDs under the red plastic.
i whanted first the disable PciE and cpu switchen what are jumpers on the evga ECP Panel in the front panel.
But i changed my mind, so nobody can fidle with them, i put them on the back of the dvd drive next to the connector of it.