smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-win7(64)-sp1] (sf-5.43-1) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: SSD2SC120G3LC709B121-460P Serial Number: PNY14140000474172093 LU WWN Device Id: 5 f8db4c 144172093 Firmware Version: 541ABBF0 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ACS-2 revision 3 Local Time is: Mon Apr 11 14:58:31 2016 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0025) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 095 095 050 Old_age Always - 8470359 5 Reallocated_Sector_Ct 0x0033 096 096 003 Pre-fail Always - 2 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4705 (246 172 0) 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1406 171 Unknown_Attribute 0x000a 100 100 000 Old_age Always - 1 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 30 177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 96 181 Program_Fail_Cnt_Total 0x000a 100 100 000 Old_age Always - 1 182 Erase_Fail_Count_Total 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 038 052 000 Old_age Always - 38 (Min/Max 10/52) 195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 8470359 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 2 201 Soft_Read_Error_Rate 0x001c 120 120 000 Old_age Offline - 8470359 204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 8470359 230 Head_Amplitude 0x0013 100 100 000 Pre-fail Always - 100 231 Temperature_Celsius 0x0013 077 077 010 Pre-fail Always - 12884901888 233 Media_Wearout_Indicator 0x0032 000 000 000 Old_age Always - 94753 234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 7276 241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 7276 242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 12166 SMART Error Log not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.