Very Low Profile (Under GPU) Right angle PCIe Risers?

[Zarathustra[H]]

As in title. Are these thing?

I have a motherboard where a two slot GPU is blocking an 8x slot I'd really like to use for something.

Has anyone seen any really low profile right angle risers that would be up to the task and allow either a ribbon or other connector to exit from under a dual slot GPU cooler?

 

[pendragon1]

lowest profile i can find:
https://www.amazon.com/Express-Riser-Extension-25cms-Foiled/dp/B07254HCGQ

 

[Zarathustra[H]]

lowest profile i can find:
https://www.amazon.com/Express-Riser-Extension-25cms-Foiled/dp/B07254HCGQ

I was clicking around looking at them too. This might work, but I]m almost a little concerned that since the rippon is attached straight out of the slot, forcing the GPU down on top of it is going to short something.

I might try it though. Appreciate the assist.

 

[Nobu]

https://www.amazon.com/dp/B0CC5KQV1J/?coliid=I2SQFIKKF7YPK8

https://www.amazon.com/dp/B0BRCK46S5/?coliid=I1UHFR4SGBAJR7

https://www.amazon.com/dp/B0BRCJ5655/?coliid=I2TNU63GOY2QRY

Dunno how well they perform, good luck!