POST YOUR AMD XP-M O/Cs here!

title. mines in my sig, around 2.6ghz 1.7v whats yours?

*sig*

2400+ 35W at... /checks speed/ 2.34ghz. not bad considering my motherboard sucks and had water spilled on it (just a little but still) at one point.

i might buy a better mobo as a send off for the aXP platform for me... but i wanna save my money for dual opteron+sli i might have to buy a (relatively) cheap dfi lanparty or so to tide me over, though. that, and a new video card

Well I have my 2500+ mobile running at 200x11 ~2200MHz (2205 according to WCPUID)

1.625volts. I could push it further but I prefer not to have overclocked ram. Haven't tried to push the multi up more but I run this computer everyday for many many hours and longevity is paramount

A friend's 2400+ on a Shuttle mobo doing 2200 mhz at 1.6 v no problem. Didn't push it further because he's not that savvy into OCing and didn't want him to have to deal with it.

I have my 35W 2400+ at 2.2ghz, 1.47v most the time, runs in the 20's *c on air, but I did figure out my max on air



ran 44*c idle at that, and high 60's load, with a swiftech MCX-462-V, AQYHA stepping,

Originally Posted by IceBawx

I have my 35W 2400+ at 2.2ghz, 1.47v most the time, runs in the 20's *c on air, but I did figure out my max on air



ran 44*c idle at that, and high 60's load, with a swiftech MCX-462-V, AQYHA stepping,

why would you not run at that ll the time? is it not stable?

Stability is iffy on that, and im a temperature freak , it will be around there once my water gets here from Snt-Systems, and i didnt really have much time to test that, as when i went for 2.8ghz...my psu died

Only pic i can find. it was 35w 2400+ running @ 13 x 200 on a a7n8x deluxe (ver 2.0) with 2 x 512 hyper x pc4000. Cooled by a slk-800.

Check my sig for mine.

mobile 2600+nf7s v2.0 1.7vcore

2600+ @ 2800mhz: 200x14 @ 2.0v

I will be feeding the cpu 2.1v+ to try and hit 3ghz

hmmm maybe I will push my multi a little more after all...can't have 2400+'s showing me up

Originally Posted by echow87

2600+ @ 2800mhz: 200x14 @ 2.0v

I will be feeding the cpu 2.1v+ to try and hit 3ghz

what kind of cooling do you have for 2.1v?

wow. my xp-m 2600+ runs at 2.56ghz now (found out it wasnt stable if i dont set the voltage to 1.7v and if i do he desk will be vibrating and the case will sound like a 747 taking off) , 1.675v, 150fsb, 300bus speed. ~40 idel with my blower set at a vibrating(loud) ~4000rpm speed, and ~61l load. how the hell can you guys get up to over 1.7v, 2.6+ghz?!? i think its because of my crappy ram

i had a 2600 xp mobile that i sold that would do 2.6 ghtz at 1.725v.. passed it up for the p4
did it all on air cooling, slk-800 with enermax turned down to point it was quiet... got temps of about 80F idle and 105 F load the p4 i got now full load has trouble heating my room even close to as much as my athlon did just idling

havent measured it since the p4 but my computer would pull almost 2 amps of power; thats 240 watts, there is consiterably less heat comign out of the power supply so i imagine its lightly loaded now

i think i need some as5. no name silver compoud i found at some stupid store and i paid 3 buck for a tiny tiny tube. what a rip off. anyways im running i think. 150x18 LOL yeah i know. think i should step up the FSB and lower the multiplyer?

changing multiplier on athlons dont do too much for overall preformance.. more fsb does a lot more imo when people change multipliers they usualy want to turn it down not up

I had three 2500+M's running watercooled in my nf7-s 2.0 @ 12.5x225 @ 1.825v.
I don't have any screen caps, but i tested it with knoppix and xp.