![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
Well its been almost 2 years since my last mod was completed. It is time to build something new.
This build is currently sponsored by Azzatek. They make awesome computer cases and power supplies. You can find them over at www.azzatek.com.
Enermax is providing 20 of the new white LED fans that have built in controllers on the lights on the fan to change the look of fan. The make awesome power supplies , case fans and computer cases. You can find them at www.enermaxusa.com.
Just confirmed Adata will be sponsoring the build with 2 of their top of the line 128GB SSD's. You can find more information about Adata here. http://www.adata-group.com/index_US.html They make great SSD's , Ram , thumbdrives and much more. The SSD's will also be custom white and/or nickel trim as well.
Here is my current setup http://www.youtube.com/watch?v=JiTSa2ktoYo&list=UUYBxPCnM13zEWgNbixq84jA&index=1
The specs of the computer so far will be.
Gigabyte Z77 motherboard. With Intel's 3770K. Don't know which one yet. If Haswell comes out by the end of april I plan on going to that.
16GB of Avexir ram with white leds seen here. http://www.youtube.com/watch?v=-eZpQ_D1FC0 I will also be attempting to nickel plate the outer part of this ram.
Video cards will be 2 MSI 7970 Lightnings. I am attempting to make custom white/nickel backplates and also custom nickel tops for the EK waterblocks I have. I might be moving to 3 Lightnings sometime in April to help push the 3 Asus VG248QE 144Hz 1ms screens in Eyefinity I am using.
For watercooling I will be using XSPC AX480-SL and XSPC AX 240-SL rads. They will have a white frame and I am also going to attempt to nickel plate the fin part of the rads if possible. I still have to go down to Art Brass in Seattle with the rad once its here to see if it is possible. For the CPU block I will be using Koolance's CPU-370 block which will match my theme. All the watercooling lines will be hard polished copper 12mm from McMasters and it will also be Nickel plated. I will be using Bitspower Multi-Link fittings for all the hard line connections. I will also try to be running 2 loops if possible. I will be using Bitspower chrome mod tops for both of the D5 pumps I will be running.
All the sleeving is going to MDPC white with a light traces of blue. Mainly white though.
The whole theme of the computer will be mainly white with extensive chrome/Nickel plating.
The front of the computer is going to be a bubble wall like this. http://www.youtube.com/my_videos_edit?video_id=K3O8sVsA6g0&ns=1 or like this ( this one has a mirror behind it... cant decide if I am going to have it see thru yet or a mirror behind it to look like there are more bubbles ) http://www.youtube.com/watch?v=34ggeG0dcPY&feature=youtu.be
Here are a few preview pics of the progress so far.
Before pictures
Picture with just the mirror in place for the back of the bubble wall.
Testing out some remote control lighting and the case is stripped all the way down.
Picture with bubble wall.
This build is currently sponsored by Azzatek. They make awesome computer cases and power supplies. You can find them over at www.azzatek.com.
Enermax is providing 20 of the new white LED fans that have built in controllers on the lights on the fan to change the look of fan. The make awesome power supplies , case fans and computer cases. You can find them at www.enermaxusa.com.
Just confirmed Adata will be sponsoring the build with 2 of their top of the line 128GB SSD's. You can find more information about Adata here. http://www.adata-group.com/index_US.html They make great SSD's , Ram , thumbdrives and much more. The SSD's will also be custom white and/or nickel trim as well.
Here is my current setup http://www.youtube.com/watch?v=JiTSa2ktoYo&list=UUYBxPCnM13zEWgNbixq84jA&index=1
The specs of the computer so far will be.
Gigabyte Z77 motherboard. With Intel's 3770K. Don't know which one yet. If Haswell comes out by the end of april I plan on going to that.
16GB of Avexir ram with white leds seen here. http://www.youtube.com/watch?v=-eZpQ_D1FC0 I will also be attempting to nickel plate the outer part of this ram.
Video cards will be 2 MSI 7970 Lightnings. I am attempting to make custom white/nickel backplates and also custom nickel tops for the EK waterblocks I have. I might be moving to 3 Lightnings sometime in April to help push the 3 Asus VG248QE 144Hz 1ms screens in Eyefinity I am using.
For watercooling I will be using XSPC AX480-SL and XSPC AX 240-SL rads. They will have a white frame and I am also going to attempt to nickel plate the fin part of the rads if possible. I still have to go down to Art Brass in Seattle with the rad once its here to see if it is possible. For the CPU block I will be using Koolance's CPU-370 block which will match my theme. All the watercooling lines will be hard polished copper 12mm from McMasters and it will also be Nickel plated. I will be using Bitspower Multi-Link fittings for all the hard line connections. I will also try to be running 2 loops if possible. I will be using Bitspower chrome mod tops for both of the D5 pumps I will be running.
All the sleeving is going to MDPC white with a light traces of blue. Mainly white though.
The whole theme of the computer will be mainly white with extensive chrome/Nickel plating.
The front of the computer is going to be a bubble wall like this. http://www.youtube.com/my_videos_edit?video_id=K3O8sVsA6g0&ns=1 or like this ( this one has a mirror behind it... cant decide if I am going to have it see thru yet or a mirror behind it to look like there are more bubbles ) http://www.youtube.com/watch?v=34ggeG0dcPY&feature=youtu.be
Here are a few preview pics of the progress so far.
Before pictures
Picture with just the mirror in place for the back of the bubble wall.
Testing out some remote control lighting and the case is stripped all the way down.
Picture with bubble wall.
Last edited:
