SMART in Solaris?

TeeJayHoward

TeeJayHoward

Limpness Supreme
Joined
Feb 8, 2005
Messages
12,271
Is there a way to determine your hard drive's status in Solaris 11 11/11? I can't seem to find a way to get the readings off SMART in Solaris 11. Specifically, I'm interested in drive temperature. I just had a drive fail out of a pool, and I'd like to know if it's temperature related or not.
 
Are you running napp-it? If so, it will display disk temp, etc. If not, you should be able to compile and install the smartctl stuff from source.
 
I'm running OI151a5 with napp-it/smartctl, and it works with SAS and SATA drives just fine.
 
You try:

smartctl -T permissive -a -d sat /dev/rdsk/XXXXXXXXX

Worked for me on open solaris/solaris with LSI controllers. Did not work with marvel controllers in the sun Xfire 4500 thumpers though.
 
I have to admit I'm running all 6 disks (two sata for rpool and 4 sas in a 2x2 data pool) of an m1015.
 
smartctl -a -d sat,12 /dev/rdsk/xxxxxx
for an onboard intel controller under OpenIndiana 151x.
 
I was quite surprised myself, but on OI it was as straightforward as described here.
 
zrav said:
I was quite surprised myself, but on OI it was as straightforward as described here.
Click to expand...
Well, gcc-dev certainly simplified things. Now if I could only figure out where the blazes the "make install" sent the binary...

edit: /usr/local/sbin.

Ran the command that zrav recommended... Not seeing drive temp. Am I missing something?
Code: 
root@solaris:/# smartctl -a -d sat,12 /dev/rdsk/c5t0d0
smartctl 5.43 2012-06-30 r3573 [i386-pc-solaris2.11] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda XT
Device Model:     ST33000651AS
Serial Number:    9XK08NHS
LU WWN Device Id: 5 000c50 02d5a511e
Firmware Version: CC43
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Mon Jul 30 13:59:52 2012 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (  609) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 456) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x103f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   119   099   006    Pre-fail  Always       -       205787322
  3 Spin_Up_Time            0x0003   091   076   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       165
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   070   060   030    Pre-fail  Always       -       4306572593
  9 Power_On_Hours          0x0032   094   094   000    Old_age   Always       -       5387
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       170
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       8590065666
189 High_Fly_Writes         0x003a   097   097   000    Old_age   Always       -       3
190 Airflow_Temperature_Cel 0x0022   053   046   045    Old_age   Always       -       47 (Min/Max 38/50)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       146
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       189
194 Temperature_Celsius     0x0022   047   054   000    Old_age   Always       -       47 (0 10 0 0 0)
195 Hardware_ECC_Recovered  0x001a   034   004   000    Old_age   Always       -       23742784999610
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       65120294147267
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       1708439380
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       3986112035

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

edit2: Nevermind. Found it. Temperature_Celsius is 47*C.
 
Last edited:
You must log in or register to reply here.
Back
Top