![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
FingerSlut
Gawd
- Joined
- Nov 8, 2002
- Messages
- 655
I've had an issue over time where the monitor would no longer wake from sleep. The monitor would turn off even if I used power scheme - never turn off.
Eventually the screen stopped coming on altogether. Turns out there is a factory reset for viewsonics that is not in the manual.
Hold down the 2 button and power button while the screen is switched off while your cpu is on. Switch on the screen while holding those buttons and dont let go. Eventually it should start cycling the different inputs looking for signal. Then you can let go.
The timing is very slow on these. It takes 10 seconds just to power on from turn on, then another 10 seconds to scan the inputs.
Felt obligated to pay this forward.
Eventually the screen stopped coming on altogether. Turns out there is a factory reset for viewsonics that is not in the manual.
Hold down the 2 button and power button while the screen is switched off while your cpu is on. Switch on the screen while holding those buttons and dont let go. Eventually it should start cycling the different inputs looking for signal. Then you can let go.
The timing is very slow on these. It takes 10 seconds just to power on from turn on, then another 10 seconds to scan the inputs.
Felt obligated to pay this forward.