loki_racer
Limp Gawd
- Joined
- Oct 8, 2009
- Messages
- 134
First I have to give credit to seven9st surfer over at http://www.overclock.net/other-hardware-mods/494272-project-triple-screen-mount.html.
I used the same hardware except that I used 3/4" pipe instead of 1/2". I also used liquid weld to keep the pipes squared.
I also added a bolt at an angle. This can be loosened or tightened to change the angle of the monitors. It also stops them from rolling under on the pipe.
I used the same hardware except that I used 3/4" pipe instead of 1/2". I also used liquid weld to keep the pipes squared.
I also added a bolt at an angle. This can be loosened or tightened to change the angle of the monitors. It also stops them from rolling under on the pipe.
Last edited: