toadtilley
n00b
- Joined
- Jan 21, 2009
- Messages
- 3
Should I be concerned if the qpi/dram core voltage is higher than 1.35?
Everything else voltage-wise is at or below stock settings.I have noticed that in some cases if I simply downclock the DRAM to the 1300 MHz range or lower the QPI/DRAM setting will drop to below 1.25 (I left it on auto to test this). Should I expect this to happen with all RAM clocked above this 1300 range or should I shop for more efficient RAM? Is this even a problem?
thanks in advance.
current setup:
i7 920 at 3.3
P6T6 WS Revolution
OCZ Gold 1600 Gold at 1654 and 1.64v
QPI/DRAM core volts at 1.3875
Everything else voltage-wise is at or below stock settings.I have noticed that in some cases if I simply downclock the DRAM to the 1300 MHz range or lower the QPI/DRAM setting will drop to below 1.25 (I left it on auto to test this). Should I expect this to happen with all RAM clocked above this 1300 range or should I shop for more efficient RAM? Is this even a problem?
thanks in advance.
current setup:
i7 920 at 3.3
P6T6 WS Revolution
OCZ Gold 1600 Gold at 1654 and 1.64v
QPI/DRAM core volts at 1.3875