Mitsubishi Diamondcrysta RDT261WH

I just found some details of a new Mitsubishi monitor here, which looks very similar to the specification to the NEC LCD2690WUXI.

25.5"
1920x1200
IPS panel (although listed as an 'H-IPS' as opposed to an 'A-TW-IPS')
HDCP
178° viewing angle
2xDVI, D-Sub

Responce times are close (15ms / 7.5ms g2g as opposed to 12ms / 6ms g2g) but not quite the same but then they always seems to change a little depending where you read them anyway.

Is this Mitsubishi trying to re-live the good old days of 'NEC/Mitsubishi' monitors? I heard that the company (joint venture) was wholly owned by NEC now.

yeah i just saw that too. a little dissapointing that it doenst have any hdmi, cause a 25.5" monitor would be reallll nice... either way though it still looks pretty promising, and not too bad of a price at 1300

I want that monitor if it proves good for graphics work (I'm finally dropping my NEC FP912 and FW900 monitors), too bad the stand seems so...boring.

Originally Posted by BillLeeLee

I want that monitor if it proves good for graphics work (I'm finally dropping my NEC FP912 and FW900 monitors), too bad the stand seems so...boring.

So which would you go for out of the Mitsubishi and NEC? Would the stand or USB hub sway you either way? I guess it's too early to tell about price for the Mitsubishi so we'll assume they're the same for now. I used to use a Mitsubishi/NEC CRT for work and it was a very good quality screen.

On paper it looks like these two screen will perform similarly, I wonder what the slight difference in specs will ultimately mean. Also I'm curious if they will make good HD movie player's, the extra inch and half of screen realestate could be good for 1080P content.

Googling shows up nothing, are these available for purchase (either nec or mitsubishi)

Originally Posted by artmonkey

So which would you go for out of the Mitsubishi and NEC? Would the stand or USB hub sway you either way? I guess it's too early to tell about price for the Mitsubishi so we'll assume they're the same for now. I used to use a Mitsubishi/NEC CRT for work and it was a very good quality screen.

On paper it looks like these two screen will perform similarly, I wonder what the slight difference in specs will ultimately mean. Also I'm curious if they will make good HD movie player's, the extra inch and half of screen realestate could be good for 1080P content.

I doubt the mitsubishi will have the extra features too like 12 bit LUT, Luminance Stabilize, DDC/CI calibration, Color Comp, and advanced OSM.

Originally Posted by jbrukardt

Googling shows up nothing, are these available for purchase (either nec or mitsubishi)

I put some links in my previous post. Other than that there is not much info on the Mitsubishi. The NEC on the other hand has a few bits of info arounf the web, I found some here and here.

Originally Posted by travbomb

I doubt the mitsubishi will have the extra features too like 12 bit LUT, Luminance Stabilize, DDC/CI calibration, Color Comp, and advanced OSM.

I would like this to be true since I have already ordered the NEC =). Do you know what NEC's policy is on dead pixels travbomb?

Originally Posted by artmonkey

I put some links in my previous post. Other than that there is not much info on the Mitsubishi. The NEC on the other hand has a few bits of info arounf the web, I found some here and here.


I would like this to be true since I have already ordered the NEC =). Do you know what NEC's policy is on dead pixels travbomb?

The actual policy is the ISO standard for dead pixels. But the panels in the 90 series monitors have strict requirments on NEC's end and it is very rare to get a dead pixel in any of them.

This is at the top of my list, I live in Japan so I can easily buy it, it's relatively cheap at just below 130,000 yen at kakaku.com. (around 1300 usd?)

It's has one of the highest ratings, and it's classified into the upper middle ranks of all the monitors reviewed at this site:

http://miyahan.com/me/report/compute...eview_RDT261WH

At a slightly larger size than 24" (25.5) and an IPS panel, it's looking pretty tempting.

There are two versions, white and black. I think the black version looks really cool with the thin silver strip at the bottom with the blue light.

Some juicy pictures.

1:1 ?

I'll get back to you tomorrow with an answer. (If someone else doesn't already)

looks like japan only, hope it has less lag than the 26" NEC as its lacking alot of the electronics.

Originally Posted by Frychiko

I'll get back to you tomorrow with an answer. (If someone else doesn't already)

The last picture is the answer... just didn't notice it.... PS3 is at 16:9 so yes there's 1:1...

Ok great, that's that then.

I've been reading up on it and this is what I've learnt:
http://miyahan.com/me/report/compute.../RDT261WH.html

1) There are different modes like gaming and desktop modes. In all other modes except desktop mode, there is banding.

2) Something with to do with the red color, but it seems oversaturated or unnaturally strong.

3) Brightness, like the FP241W at the lowest mode is still too bright (around 100-110 cd/m2) but it can be reduced to 80cd/m2 according to user reports.

Anyway probably not much interest in this monitor, as it's not available anywhere else.