Recent content by tbogstad

that was kinda stupid, he could have got a new motherboard and cpu, and like 512mb pc3200 ram for the same money and a had a up to date system. that ram was $200.00 or so, you definately get a 754 sempron and motherboard and 512mb pc3200 ram for $200.00 or so.

seeing as you can get a evga 7800gt and sli motherboard for $340.00 after $20.00 rebate. http://www.monarchcomputer.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=M&Product_Code=1909641&AFFIL=TH&NR=1 this would be good for people with old systems that would be a waste of such a powerful...

http://www.rhcf.com/sis-bin/ultimatebb.cgi?ubb=forum;f=14;hardset=0;start_point=0;DaysPrune=0 the stuff this guy say to do helps but does not solve my problems with 2 x 1gb sticks, i changed to 4 trtw, now it last loger, but still crashes eventually, so it helped but did not solve the problem...

yeah i am beginning to think you are kinda right. i could not run 1T at all with my Gskill pc4000 , but i just put some Corsair pc3200 value ram cas2.5,3,3,7 in and it is running 220FSB cas3,4,4,8,1T and it is prime stable. where as the pc4000 Gskill was never prime stable with 1T. so...

your at 330 1:1 ???? that is freaking amazing, i guess maybe it is my ram. :eek:

I flashed to the JEtway BIOS no problem at all. I can now run a little higher than i could with the EVGA BIOS, but it still leaves a lot of problems. TO run 1.6V core, you have to set to 1.55V and the set the 7-thing below it to .05V and so on, you can set ip up to 2.0V core i think. it...

I used winflash from EVGA site and bios from jetway site. saved my old bios, and flashed the entire bios, make sure and have DMI selected so you flash the entire bios.

could someone post the JetWay bios that works for this EVGA board, i am fed up with the evga bios, it sucks big donkey balls. i can't overclock at all without seting 2T, and bank interleave diasabled, which totally destroys ram bandwidth. I am ready to flash this thing right now!!!!

Max for the Gskill 2 x 1gb set is 260 cas3,4,4,8,2t and sandra is crappy at 2T, i was getting better bandwidth at 225 cas2.5,3,3,6,1T My cpu won't go over 2.6ghz either, i tried rasieing the volt core up to 1.65V and it was no help. i had htt at 310 and ram at 246FSB i think, but with 8...

thats what i am at right now Headless. What is you r core volts at 2.8GHZ ??? 265fsb gave me wierd artifacts in the bios, so i don't thikn the Gskill 2 x 1gb pc4000 will go any higher. i guess i will need to use a divider to get above 2.7ghz like you.

i had to up volts core to 1.6 to get it to boot at 2.6ghz, also at 265fsb i got artifacts in the bios, don't know if it is the gskill or the motherboard stopping my fsb from going any higher.

NO PROBLEMS SO FAR JUST RAN A BENCH AT 2.4GHZ. 3dmark05 was 7227 with all stock 7800gt about to bump up to 250fsb, previously would not boot with 1T and bank interleave. we shall see what happens.

I am building the set up right now with a A64 3200+ E6 SP-120 and the Evga bundle from newegg 7800gt and 939 SLI board will post in a few hours so overclocking, there motherboards seem to be very picky, so this may not be a very good measure of what the ram can do.

I just pulled the plastic bracket off a old P4 478 socket board i had and in stalled in in the P4 holes on thie motherboard, and in stalled my SP-120 no problem. so all you need a a P4 bracket and you are good to go.