SATA Mator Problem. [Archive]

phataj

06-08-2005, 01:22 PM

Hey,

I have a Maxtor SATA 80 Gig. And when i try and install windows on it says "Inspecting your computer configuration," or whatever that the screen just goes black. And the HD activity lights are solid.

Thanx for your help ahead of time.

PHATY

DougLite

06-08-2005, 01:33 PM

A) Go back to stock frequencies, and load BIOS defaults.
B) Verify that you have the latest release BIOS for your mobo
C) Make sure Windows has drivers for your SATA host, either by using the ATAPI drivers or providing an F6 disk
D) Proceed with install

phataj

06-08-2005, 01:48 PM

Sorry... Forgot to mention that i have had windows on this hd before.

yeah... i have tried all of that.

aj

lithium726

06-08-2005, 01:51 PM

go to maxtors website. download the diagnostic. run the diagnostic, make sure the drive is functioning correctly.

Astral Abyss

06-09-2005, 01:11 AM

Try setting all IDE and SATA channels with no drive connect to "None" in the BIOS instead of "Auto". This helped a lot with detection issues on my Maxtor.

XtuRmN8r

07-12-2005, 04:36 PM

did you get it to work?

I currently am having the same problem; but my drives are all IDE. I just flashed the BIOS with the newest one, and I have a Neopower 480, so what do I fix next? I set the secondary drives to none, but if I set the primary drives to none it didn't recognize the hdd.. :confused: