PDA

View Full Version : Revisiting OCZ PC3500 Plat LE BH-5 @250mhz 2226 [pics]


eva2000
05-31-2004, 11:22 PM
Dam i decided to see what cooling memory will do for ocs and man I'm surprised by 1GB OCZ PC3500 Plat LE BH-5 on AI7 at 3.18v

--------
no cooling

max prime stable = 240mhz 2-2-2-6 667fsb strap A-A-A-D-D
max benchable = 242mhz 2-2-2-6 667fsb strap A-A-4-D-D

--------
with cooling
strapped 60x38mm delta 50-60cfm fan on the top mid section of the ram modules with TT fan speed control set to high

placed the Delta 60x38mm 50-60cfm fan onto of the 2 ram sticks in the middle. Taped a piece of cardboard on one side of the fan so it flushed against the side of ram stick in dimm slot #3 and taped the cardboard to the ram stick using masking tape. Then taped other side of the fan to the Corsair Hydrocool's waterblock retention spring on my the P4 bracket.

Posted pics here (http://www.fileshosts.com/memory/ramcooling/delta_60x38/AI7/web/)

http://www.fileshosts.com/memory/ramcooling/delta_60x38/AI7/web/coolram_000_thumb.jpg (http://www.fileshosts.com/memory/ramcooling/delta_60x38/AI7/web/coolram_000.html) http://www.fileshosts.com/memory/ramcooling/delta_60x38/AI7/web/coolram_004_thumb.jpg (http://www.fileshosts.com/memory/ramcooling/delta_60x38/AI7/web/coolram_004.html) http://www.fileshosts.com/memory/ramcooling/delta_60x38/AI7/web/coolram_006_thumb.jpg (http://www.fileshosts.com/memory/ramcooling/delta_60x38/AI7/web/coolram_006.html)


max prime stable = not yet tested but can do super pi 32M at 245mhz 2-2-2-6 so far
max benchable = 250mhz 2-2-2-6/7 667fsb strap A-A-A-D-D

-----------------
updated to 17 official bios and increased unbuffered scores to 3828/3801 MB/s!

unbuffered
250mhz 2-2-2-7 at 3.18v vdimm
http://www.fileshosts.com/pentium4/D1/abit/AI7/results/2.8C_SL6Z5_B542/HC200/ocz/pc3500platLE/2x512/NB667/HTon/delta/250-250-2227-AAADD-1.75-3.2-1.65/mem-unbuff_17bios.jpg

http://www.fileshosts.com/pentium4/D1/abit/AI7/results/2.8C_SL6Z5_B542/HC200/ocz/pc3500platLE/2x512/NB667/HTon/delta/250-250-2227-AAADD-1.75-3.2-1.65/pcmark2002.jpg


3dmark2001
128MB Gigacube 9800PRO Extreme @ stock 398/351x2 speed
Cat 4.3

http://www.fileshosts.com/pentium4/D1/abit/AI7/results/2.8C_SL6Z5_B542/HC200/ocz/pc3500platLE/2x512/NB667/HTon/delta/250-250-2227-AAADD-1.75-3.2-1.65/3dmark2001_9800pro_398-351-21072_all.jpg

compare url = http://service.futuremark.com/compare?2k1=7860709

3dmark2003 340 with cat4.3
128MB Gigacube 9800PRO Extreme @ stock 398/351x2
http://www.fileshosts.com/pentium4/D1/abit/AI7/results/2.8C_SL6Z5_B542/HC200/ocz/pc3500platLE/2x512/NB667/HTon/delta/250-250-2227-AAADD-1.75-3.2-1.65/3dmark2003_9800pro_398-351-6425_all.jpg

Pcmark04 120 memory
http://www.fileshosts.com/pentium4/D1/abit/AI7/results/2.8C_SL6Z5_B542/HC200/ocz/pc3500platLE/2x512/NB667/HTon/delta/250-250-2227-AAADD-1.75-3.2-1.65/pcmark04_mem.jpg

Note: cpuz on AI7 reports wrong cpu/ram ratio when NB Strap 667fsb is used and swaps 1:1 and 5:4 around.

So guys cool ya ram!

blindviper
06-01-2004, 08:52 PM
the 3200 is bh-6 and the 3500 is bh5 right?
good write up

M4d-K10wN
06-01-2004, 09:48 PM
They can do better than that :). You just need mroe vdimm. I say they can do 2-2-2-X DDR600 at 3.6-ish

eva2000
06-02-2004, 03:41 AM
the 3200 is bh-6 and the 3500 is bh5 right?
good write up

OCZ PC3500 Platinum Limited Edition = BH-5
OCZ PC3200 Platinum Limited Edition = BH-6