POLL: What voltage do you run your XP2500 at?

[Reality]

AQYFA, Week 42 UPMW.

11 * 200 / 1.65 Vcore

Got it from Newegg's NJ warehouse about 6 weeks ago. Ran it at 3200+ speeds without touching the voltage, and haven't had a reason to since.

[thezfunk]

Motherboard gives inaccurate results lately I have noticed....don't know if it needs tweaking for the newer motherboards or what....

[Elec]

AQUCA 0306 UPAW

11x200 at 1.85Vcore, goes from slightly less than that up to 1.92 max. Running about 4-5 months with an SK-7 heatsink and 80mm tornado on a rheobus.

If you keep your temps down, you're probably ok for the short term. I have my mobo set to shutdown at 60C (well below the frying point), and it does work, as I've found out a couple times. The tornado takes more juice to start than to run, so if I have it spinning at a low RPM, turn off the computer, then turn it back on later, it won't spin up again unless I turn it up some. If I forget, it takes about 10 minutes of email/web surfing type use for the chip (and heatsink, ouch!) to hit 60C and shut down :)

[Andrew87]

Some of us seem to have really sucky chips which won't run stable at 3200+ speeds without 1.8V. Also we seem to be the ones having fluctuating voltages. Does anyone know what causes this?

I'm running a Superflower QuadFan 470W PSU and I didn't use the large sticker which you're supposed to stick underneath your motherboard (A7N8X DLX); could this be causing the overvaulting? I think I will have to back down my overclock to maybe 180x11 and 1.7V if I'm wanting 3years from this chip although it was good to see one member with a 1.85V running for 5months, although these newer locked Bartons seem to need more voltage?

Thanks for posting people, keep it up :).

[’m‚³‚ñ]

Originally posted by Andrew87
Some of us seem to have really sucky chips which won't run stable at 3200+ speeds without 1.8V. Also we seem to be the ones having fluctuating voltages. Does anyone know what causes this?

I'm running a Superflower QuadFan 470W PSU and I didn't use the large sticker which you're supposed to stick underneath your motherboard (A7N8X DLX); could this be causing the overvaulting? I think I will have to back down my overclock to maybe 180x11 and 1.7V if I'm wanting 3years from this chip although it was good to see one member with a 1.85V running for 5months, although these newer locked Bartons seem to need more voltage?

Thanks for posting people, keep it up :).

I think I've had my Barton at 1.85v for more than 5 months. It's been closer to 8 months for me. I checked voltage, mine is currently 205 X 11 @ 1.84v. Low 40's (Celcius) load, always loaded due to F@H.

[-=iNsAnE=-]

219x11 (2.41 GHz) at 1.95v.. it fluctuates between 1.93-1.95 or so.. been running for just over 24 hrs :D and its still running great! *knocks on wood*

i had it at around 1.85 for around 2 weeks though before i bumped up my OC... temps are around 47-48C load at 1.95v on water.. seems very very high to me.. i gotta refine my WCing setup still :(

edit:: its an AQYFA week 43 locked, btw

[FiZ]

although these newer locked Bartons seem to need more voltage?
I have a week 47 and it runs on stock voltage at 3200+ speeds, stable as a rock.

[Rich_Fray]

Whatever happened to the good old days when peeps ran some voltage through their cpu's? Not a single one in this thread at 2v or better except here.

2.02-2.05v for a number of months.

[’m‚³‚ñ]

Originally posted by Rich_Fray
Whatever happened to the good old days when peeps ran some voltage through their cpu's? Not a single one in this thread at 2v or better except here.

2.02-2.05v for a number of months.

I want my CPU to last longer than a year. :p Plus, even with an SLK 800u, I get up into the mid 60s temp wise. D:

[Roach]

Originally posted by Rich_Fray
Whatever happened to the good old days when peeps ran some voltage through their cpu's? Not a single one in this thread at 2v or better except here.

2.02-2.05v for a number of months.

Hehe, my good ole PII 400 ran at 500 Mhz at a nice toasty 2.2v's. Tis a pitty it got replaced this x-mas with my faster 2500. Come to think of it I think all my overclocks should be faster then the base speed of the proc that I've replaced it with :D



Man that means my next computer is gonna be atleast x + 1.83Ghz = y :p

[-=iNsAnE=-]

Originally posted by Rich_Fray
Whatever happened to the good old days when peeps ran some voltage through their cpu's? Not a single one in this thread at 2v or better except here.

2.02-2.05v for a number of months.

i was the closest with 1.95v! :p i would run 2v but i cant post at 220 fsb with any voltage (gonna tinker with it more later) but i can post fine at 219 with 1.95

if my cpu lasts me a year i'll be happy.. it cost me $88 and in a year i'll probably have an A64.. now if i had a new $800 a64 FX or something it may be a different story ;)

edit:: rich_fray.. since you run at 2v what is your opinion on my temps? 47-48C full load.. it seems a bit high for water.. whats your thoughts? while we're on the subject...

[’m‚³‚ñ]

Originally posted by -=iNsAnE=-
i was the closest with 1.95v! :p i would run 2v but i cant post at 220 fsb with any voltage (gonna tinker with it more later) but i can post fine at 219 with 1.95

if my cpu lasts me a year i'll be happy.. it cost me $88 and in a year i'll probably have an A64.. now if i had a new $800 a64 FX or something it may be a different story ;)

edit:: rich_fray.. since you run at 2v what is your opinion on my temps? 47-48C full load.. it seems a bit high for water.. whats your thoughts? while we're on the subject...

I have to run 2.1v to get to 2.5 ghz on my Barton. ;) Not stable by a long shot... I can get it to POST at 3 ghz on my Barton at 1.95v, as well. Possibly at 3.2 ghz as well, but I don't want things dieing horrible deaths. :p