View Full Version : Overclocking & Cooling
- is my computer running hot?
- Cooling NF4-SLI Chipset!
- Bandwidth and Ocing question?
- 287 x 9 or 369 * 7? Does it matter?
- HElp Please
- Weird thing with my OC on my 680i......windows detecting wrong processor speed?
- cpu temperature infos
- Zalman 9700 and AS5
- AS2 v zalman
- Crucial 10th Anniversary 2GB DDR2-667 / PC2-5300 Memory w/Striker Extreme and E6600
- How long do i need to wait for thermal paste to kick work?
- 3Ghz Opty 165 - Ram issues
- Overclocking Conroe E6700 on eVGA 680i issues
- Anyone tried MCW60 hold down kit on 8800 series?
- installation direction determines volume of fan?
- the best heatsink to date: the original Zalman 9700
- instability when overclocking RAM
- Poor 3dmark05 scores with fast system??
- Me Thinks Motherboard is Holding Back CPU
- Problems with AC Freezer Pro 7
- Help overclock E6300 + Asus P5NSLI
- where can i put a fan?
- Help with E6300 and GA-945P-S3
- Temp question
- 680i, E6300 oc gap(s?)
- Found individual max speeds but can't get near it with combined settings...
- Monitoring software for CPU temps and Frame Rates while gaming
- Ambient affecting Core 2 Duo temps by 9C?
- Ram Speeds and timings test with results...
- Noctua NH-U9 + p5b-e plus
- e6600 on 3.4 - how safe is it for 0/24
- Waterblock optinos for Core 2 Duo?
- Question about Coolermaster Aquagate
- Tuniq Tower 120 users - dump the bundled paste and use AS5
- Conroe on 680i - could use some help...
- OC Mystery........
- I need to monitor my temperatures, but...
- 120mm side panel fan and bottom PCI-e slot...
- Is This A Good Overclock?
- VF900 Installation
- Asus P5B-E Overclock disables internet?
- Prime Acting Up
- NVIDIA's overclocking guide and C2D's max adviced voltage
- Bad Axe 2 + Freezer Pro 7 - HELP!
- Scythe Ninja -- beware!
- Temps up after using zippo to clean off zalman thermal grease
- oc'ed a store bought
- Can't get FSB over 216mhz?!
- My case fans continue to reverse directions...
- Speedfan or CoreTemp?
- Controlling 4-pin CPU fans?
- Cpu and MB heatsinks. Need advice.
- Another E6300 Overclocking help request
- Zalman 9500 question
- opteron 165 or opteron 170 for my spec?
- Help with e6300 OC please!
- Heatsink for s939 X2 Processor
- E6700 - Temps High?
- over clocking causing problem?
- Overheating
- Zalaman 9700 Installation -with a C2D
- Need help installing fan on heatsink!
- TuniqTower120
- CPU-Z / ORTHOS Discrepancy
- My Vapochill Mod And System
- Ignoring my settings in BIOS!
- Some New Parts and OC Help
- New rig built, temps seem too high E6600/Tuniq
- what do I believe?
- Got a winner?
- Newb Question on Temps when OCing E6600
- need CPU cooling advice
- a64 2.4 @ 2.7 stock HSF, how to get more ?
- *p3b-e & e6300* What memory to buy?
- CoolerMaster Susurro HeatSinkFan anygood?
- Need the right gpu block and a few other questions for my SFF PC
- temps high for A64 X2 4200+?
- Tuniq Tower - Thermal Grease that comes with it.
- CPU Temp alright?
- Thermal Sensors
- OC Problems with Opty 170 939.
- What air coolers are people running on their eVGA 680is?
- Replace case fans, believable specs?
- Aquagate Mini R80 Liquid Cooling System work with Intel C2D E6600???
- nub question to do with undervolting
- Noctua NH-U12F on AMD Athlon 64 X2 4800+
- Which Cooler for E6300 ?
- Noob question about fans/fan controller.
- Hyper 6+in microfly?
- Zalman 9700LED vs 9700NT
- Coolermaster Cool Drive 6
- Good articles on how to overclock a E6600?
- How High can I OC my memory? Corsair XMS2
- OCZ XTC DDR Cooler
- OCing my Card
- Opteron 165 OC help
- new system pics!
- What thermal paste..?
- DFI and clockgen?
- Quick 'n dirty 120mm Fan Mod
- Beginning to OC an E6600
- Zalman 9500 vs. 9700?
- My Ultra-D HTT limit is 310mhz is this normal?
- Will OCs be as stable in Vista as XP?
- The Truth About Overclocking SLi GPU's
- ASUS OC Quality
- Opteron 150 Overclock Help
- Just Switched To a Scythe Infinity :D (PICS)
- which way to go 939 fx-60 or AM2 5200+
- OC with C2D E6300 and ASUS P5L-MX
- A8N-Sli Premium - do I need a new NB cooler?
- Cooling for Asus Crosshair with Dominator ram
- Noobie trying not to break something.
- X2 4800 (939) Attempt to OC to 2.6GHZ? Any true perf gain?
- Cleaning Up Dust
- 680i evga OC ?
- Swiftech MCX775-V CPU Cooler , Is it to heavy
- Need fan recommendations for my home theater cabinet!
- What is the best non fan heatsink for an AMD X2? I want no noise!
- so what is a legit screenshot to show temps? (programs)
- Opinions?, Opteron heatpipe sink, or Zalman CNPS7000B
- worried here! please help!
- Looking for a small heatsink and fan..
- P965 chipset and overclock "straps"
- artic cooling rev 3 on a 7950gt
- Explain overclocking and whether it's necessary for me, please!
- Core Temp meter reading wrong? BIOS?
- Another one - Zalman or Stock Intel Core 2 Duo?
- Opty 165 CCBBE 0615EPMW on A8R32-MVP Deluxe
- ASUS A8R32-MVP and AMD 4600 X2 ...HELP
- Going X-Water Cooling (mineral-oil with nitrogen pellets 24-7) Check the project out!
- Big problem with heatsink reviews/ admins please read
- is there a way to have Everest temps on top of full screen games?
- OC - Quantitative Study?
- E6300 Overclock randomly restarting
- Sorry if this sounds noobish haha (about zalman 9500)
- whats your best OC on an AMD 3800+ X2?
- E6300 OCing, How to do it properly?
- Help with Biostar Tforce 965PT Overclock
- best standalone temperature monitoring program
- Disappointing oc results on new opteron 165 - help
- Gigabyte DS3: FSB >400
- New system and overclock!
- OC help and question
- Quick question regarding the HT link
- just a quick question
- Voltmod accident! 6800GT not posting!
- How do find Max RAM speeds on core 2 duo?
- Ultra PC Vent II Exhaust Fan
- In need of a GPU cooler.
- any 4post-4post designs?
- P180 Cooling
- Monitoring Software
- Running 6800GT at 1.6volts?
- opteron 170 + A8N SLI Deluxe ARGH!!!!
- E6600 + Zalman 9700 - Newb Temp Check Please
- mobo options changing
- System shuts down during OC, problem?
- Overclocking AMD ath xp 2800+
- Freezer 7 vs Tuniq vs Infinity
- Help me quite down my case (fan related)
- Intel Duo Core E6300 --> Crappy OC?
- Fans for qx6700?
- Do chips usually need more vcore to hit the same speeds when running bh5 vs. tccd?
- Stablility Issue
- New H2O System Build – Review (Please)
- e6300 OC suggestions
- New rig- need help choosing a HSF
- Anyone Have good overclock on a Biostar P965 PT board?????
- Asus a8n-e overclock problem
- My new P5B-DLX and E6600 oc results?
- Help!!!!!!!!!!!!!!!!!
- Asus P5B-E, Kingston HyperX 750MHz, e6300.. Help me OC
- Opteron 170 OC questions
- Dual SuperPI error at default Clocks (680i E6600) ?
- 7600gt ram coolers
- E6600 Temp Problem :(
- Memory OC question on Asus P5B Deluxe w/ E6300
- SuperPI 1MB time with this setup?
- ASUS A8N32 Ultra SLI Question
- I owned myself
- Help me air-cool my C2D in a Sonata II
- ocing with epox 9npa+ ultra
- Does it fit?
- is my zalman9500 on tite enough?
- Easiest overclock settings for a dummy (DS3/E6300)
- Is there a performance penalty for half-multis on Core 2?
- Why is my gfx card getting so hot?
- Problems as a result of Overlocking
- OCing celeron 1000GHz on Energy Mobo
- Question about applying AS5
- E6600 vcore at 1.275 instead of 1.325
- help with fans
- Overclocking a Pentium 4 on a DS3...
- Can I mount an XP-90 with mobo in case?
- please help me
- P5B DLX + E6600 + OC = 3Ghz?
- Please help me reach 3.4 guys
- Super PI
- Cpu Quiet Fan
- Normal to have two different vcore ratings (on speed fan)?
- stock E6300 running too hot while idle
- Asus P5W-DH / E6600 / 2GB G.SKill 6400 HZ anyone? Safe OC settings?
- Overclocking E6600 on a Asus P5B Deluxe
- When changing Multi's why does this happen?
- Is overclocking this easy?
- A8V and a 3000+
- those little zalman vga ram sinks...
- Panaflo Fan Questions.
- Giabyte 965P DS3 REV 2.0
- zalman cnps9700 installation ??
- CVD or DumpIt
- Question about lifespan of a processor after OC
- New to overclocking, help with a 6400
- Replace Zalman 9500 fan
- Which one?
- Cm AquaGate Or Zalman 9700
- 3pin cpu fan question
- where would you put four temp sensors?
- Overclocking?
- Problems overclocking P5B Deluxe
- Overclocking on my Giga 965P-DS3
- Windows only recognizes one core!
- Need help with E6600 OC
- Thermaltake Blue Orb and my oc
- e6300 stock heatsink fan help
- Is orthos a good overclock stability tester?
- does undervolting an LED fan affect the lighting?
- Amd Dual Core Temp differ
- Advice on LeadTek 6800GT + NV Silencer
- Need more Arctic silver
- Arctic Silver on Video Cards - Bad Idea?
- Naked Opty & Freezer Pro??
- fx-55 temps too high?
- what would be better?
- oc'd, now pc wont boot
- Opty 165 is getting a mite hot...
- Safe to use nvidia ntune to overclock?
- E6600 OC'ing voltage
- Please Delete Wrong Forum
- Scythe Infinity Users - help!
- Quietest 7900 cooler?
- Difference? (paste)
- installing zalman cnps9500
- Do Newcastles overclock well?
- Best C2D Passive Heatsink - Ninja or Thermalright Ultra 120?
- Best low profile cooler to fit Lian-Li V600
- Asus P5B MCH Voltage (Auto?)
- General Cooling Question
- thoughts on 2 sli boards
- Question on "Bad Axe 2" D975XbX2 & C2D E6700 overclock
- Best overall case fan?
- C2D: To passive or not to passive
- hight temps nonoverclocked. advise?
- OCing for 680i - Step by Step - Please Correct if Incorrect
- Help with Biostar 965PT
- Opteron 150 OC Sucks Must Be A Bad Stepping
- Bummed with my Temps: C2D 6700 / Asus P5B
- 7600gt volt mod...
- P4HT 540 or X2 3800+ s939
- ***PLEASE HELP kinda confused***
- GF 7950 GT OC..should I oc it or not?
- Seeking recommendations on air-cooling solution
- Reversing Fan Airflow
- Help an overclocking noob out with E6300 !!
- 7900GT: 71C (is this bad?)
- Best Mobo Monitor
- Replace XP-120 with Tuniq Tower 120?
- Which temp reading to use?
- Watercooling a Tuniq Tower - Is it Feasible
- newbie question about memory divider
- cooling for asus p5ne chipsets?
- 7 hours good for CPU stress on orthos?
- My first oc, hows everything look?
- Unlocking multiplier.
- Helpanoob: Can't get new Opty 165 past 2.55 GHz
- PRIME Don't Place Much Faith In It?
- Abit KN8 SLI Bad OverClocker Can It Be Modded?
- Understanding the A8N32-SLI Bios?
- LED fan power consumption?
- FSB Ram Ratio
- Um, i dont think this was supposed to happen...help!
- Higher multi and low fsb or high fsb and low multi,What would be faster?
- Unusually high Memory Bandwidth on dubious overclock of Opteron 180?
- Almost finished up with my system, questions on memory OC.
- Big Typhoon Installation Problems
- AMD 3800 X2, need some advice.
- Big Fan for System
- Overclocking Help
- 7 vs. 9 blade fans
- HOLY BEJESUS is the Tuniq Tower 120 Ginormous!!!
- question about component selection and overclocking
- A question about overclocking temperatures.
- specs of the stock intel cooler
- Will this OC well?
- HB-05 & Asus P6B Deluxe?
- HB-05 & Asus P5B Deluxe?
- P5B Deluxe E6400 Overclock!
- PC8000 5-5-5-12 or PC8500 4-4-4-12 with the E6600 & P5B Deluxe?
- PC8500 5-5-5-12 or PC8000 4-4-4-12 with the E6600 & P5B Deluxe?
- New to OC.
- Cooling options for Gigabyte-965P-DQ6 mobo??
- Noob needs help overclocking Intel e6600 and Asus p5n- 650i
- Side Case Fan
- New Overclock results..........
- Corsair Nautilus500
- Where to buy Yate Loons
- thermal paste question
- Load with TAT or Orthos
- Frequent Reboots after Zalman 7000 install, I'm out of ideas.
- Can this be done?
- hmm.. toasty conroe
- Removing Thermal Paste.
- Zalman 9700 kicks ass!
- Standby Issues
- Air/Liquid solutions for 2X 8880?
- 8800GTX SLI Temps
- Anyone try this?
- Usable Life on AS5?
- Lap my Tuniq, my IHS, or both?
- First Intel Overclock, need Help
- memory won't oc at all
- Where's the Ram Multi on a DS3?
- 8800GTX watercooled OC brings 3dmark down
- An overlooked overclocking factor?
- Should I bother getting a Zalman 9700LED for my Opty 165?
- Could I have a defective Scythe Ninja?
- That last squirt of AS5 is useless!
- Dell Inspiron 6400 Core Duo ocable?
- Attn Core 2 Duo owners. Please post your Super PI results.
- AMD 3700+ SD Overclocking
- heat output of presler? x1900xtx?
- Lapping C2D and Tuniq 120
- Water Cooling Help....Experts Please
- first time overclocking this rig, Windows crashing at boot
- Pentium D 805 cooling question.
- Quick FSB:RAM ratio and overclocking question
- Gigabyte DS3 Northbridge Heatsink Recommendations
- CPU-Z Bus Speed off by 1 MHz from BIOS
- Zalman 7700CU?
- E6600 temps issue (open / closed case)
- Gatewagy GM5260
- fan speeds? need advice.
- need some help (oc noob)
- Could it be that the E6600 Conroe is the modern 2.4C chip or what?
- e6600 fsb question.
- Is open air cooling a good or bad idea?
- Best Socket 478 p4 for overclocking
- My overclocked BIOS Picture screen [P5B DLX]
- Removing Tuniq 120's back plate
- Need help OC'ing Dad's computer...
- which can be oc'd to perform best: e6600 on p5w dh deluxe OR e6400 on p5b deluxe
- Socket A cooler compatible with Socket AM2?
- Which tests and for how long ?
- overloaded 7v
- core2 duo 6600 OC assistance...
- Newbie on overclocking a E6600 with a p5wdh delux
- Temps a little too high. Need some help.
- Scythe infinity is a pain to get on!!!!
- Pentum d 805 or 820?+Does memory speed matter to much?
- Need help getting past 330 FSB
- Tuniq?
- i enabled "top performance" in bios.
- Ok so my plans have changed *PICS*
- AMD 3000+ Overclocking Suggestions
- Opty 165 temp help.
- Help with Cooling/Overclocking
- New to Intel overclocks: E6400 help
- CoolIT Freezone Chilled Liquid CPU Cooler
- Hard Drive Overheat Symptoms?
- x6800 - too hot under heavy loads?
- Won't even turn ON! Just great...
- Pentium-D 805 Overclocking Problems
- Best OC CPU ever??
- Koolance, TEC, or DIY
- random reboot?
- i'm at CES - is new gpu coolers from arctic cooling old news?
- Which board/chipset P5B-VM(G965)/P5LD2-VM(945G)? help plz!
- speedfan guide?
- overlocking with cool and quiet on?
- Does core frquency to SPP ratio matter?
- Need help with cooling for Socket A AMD XP2000+
- Where can I find a retention clip for my SK6 heatsink?
- HSF for A8N32
- ORTHOS "Paging" - What's a sure-fire way to stop this?
- 7800 gtx gpu-heat output-need to know
- automatic fan speed for gfx
- how to unlock your CPU multiplier?
- Temperamental Processor
- Overclocking Failing
- Heatsink in Microfly (again..)
- System instability
- Can I safely hit 3 GHZ with the following set up?
- What's my potential...
- Guide to overclocking Core 2 Duo with P965?
- *HELP* AC Freezer Pro 64 Four Prong Connector
- RAM Speed on Intel D865PERL
- Please help me OC my E6600 on 680i. Sorta stuck
- Temp monitor for P965 northbridge/MCH?
- Big Problem - CPU Failed under OC
- Trouble with OC
- 2.8GHz E6400 reading as 3.2GHz in Windows- problem?
- any problem if increase ram voltage
- P5N-E south bridge chipset cooler (with dual slot GPU)
- Athlon XP 2500+ Barton OC... low temp but can't get more?
- SI-128 or ???
- Moving out of Phase Change... Should I go water or air?
- is there a software who can monitor cpu FAN?
- replace stock HSF fan?
- Control Silverstone FM121 with 3 pin fan controller..
- Quick Temperature Question
- Hybrid H²C cooling...Dell goes watercooled..
- Need some help 1st OC....E6600/Striker
- E6600 pretty hot, should I bother lapping my big typhoon?
- I see Dell has gone to water cooling...
- Quiet 80 mm fans ???
- Noise be darned, highest CFM 80, 92, and 120 mm fans?
- Long time overclocker, new system, trying to max out, need suggestions
- cooling a router?
- Is it ok for the cpu heatsink to touch the northbridge a little bit?
- Basic overclocking question??
- Water Cooling Kit
- 1st time overclocking (e6300, p5b-e), any guides?
- Driver stuck in loop error when overclocked past certain range
- Some real serious Dual Xeon OC & Watercooling!
- Whats wrong with my temperature? :(
- Can't overclock my P5B-E
- Cooler Master Vortex TX
- which stock cooler to use?
- What would give better performance Pentium D or Am2 or s939?
- Best Overclocking Method?
- Hope I handeled this right.
- Voltage questions
- C2D max temp?
- 680i Chipset Cooler
- Is there any software to loch or cange pci/pcie busses in windows?
- Opteron 165 OC, memory divider issue
- ASUS Silent Knight All-Copper Cooler
- Tuniq fan direction in V100+II
- RAM voltage and timings
- Asus P5b-E OC Tool : Al Booster and CPU Idle seting
- system temp with passively cooled 7950gt
- High Airflow Fans
- ntune?
- Newegg has Tuniq Tower 120s in stock
- Ram and HD cooling
- overclocking a e6300 questions
- Side case fan
- DS3 Rev1 vs Rev2 overclocks
- Zalman zm-mfc1 lights flash...
- Climate-Induced Temperature Changes
- best fan for QX6700 OC ?
- My Fun with the C2D E6600
- fx55 best cooling ??
- acceptable temp range, in degrees celsius...
- no point in overclocking
- High CFM LED fans ?
- Core 2 Duo E6600 Overclock 3.4Ghz.......
- 6300, P5H, and Corsair DDR2 800
- automatic fan speeds need, help please
- side door off, safe?
- Where can I buy the CoolIT Eliminiator?
- did I fry my RAM?
- Which cpu and chipset block should i buy?
- Memory first or leave it alone ?
- leftover Arctic Silver 3
- Help ocing x6800, p5w dh deluxe,geil pc2-6400 4-4-4-12
- O/C Error onb oot up
- interisting crash checkdisc gripes
- Best Air Cooling???
- P5B Deluxe :: Hot NB
- Please, some tuning assistance
- Zalman that will fit in Micro ATX Case?
- E6400 EVGA 680i Sli OC
- Open case vs closed case
- Lapping Zalman Waterblock
- Dynamic clocking? (both under and over)
- Assistance OC'n 2.13 Core2 Duo, ASUS P5N32-SLI SE Deluxe, PC 6400 XMS2 corsair ram
- Couple of Overclocking Questions
- Tuniq Tower in Antec SOLO?
- Which pathetic overclock do I chose
- E6300 on MSI 975X crossfire
- How long are these overclocked conroes lifespan?
- Quad Core EVGA 680i OC
- Voltages are confusing
- New HSF vs. larger fan...what to do?
- Best Software to oc a nvidia 7900GT
- Zalman 9700 or the Tuniq Tower 120 Cooler?
- Slight problem overclocking opteron 144
- Fans and component cabinet question
- temp difference between cores
- Zalman CNPS7700-Cu, P5B deluxe and Overclocking?
- BTX heatsink; will any LGA775 heatsink work?
- Killer System - Horrible 3DMark06 Scores
- 26hr primestable but not?
- S3 + E6300 + 2x1GB G.Skill DDR2 800 -- OK for overclock?
- AtiTool + Orthos
- Boot issues
- Quick question about Vcore
- 8800 OC
vBulletin® v3.8.2, Copyright ©2000-2009, Jelsoft Enterprises Ltd.