View Full Version : Overclocking & Cooling
- Best Case for Air Cooling
- need a cpu info program like adia or something
- heat sink fan died, suggestions on a new one?
- Best Cooler for an Athlon64 3200+
- Abit NF7-S & Zalman CNPS7000A-ALCU
- Need help on fan selection.
- Need some P4s to post some Sandra CPU benches
- OC'ing retail computers
- need a new 450+ watt PSU
- Fan Modding..
- overclocking 1.33 Althon TBird
- Wanting A64 @ 300 x 8. Reccomendations
- video cooling fan
- overclocking help ... what am i doing wrong.
- KT6, any hassle taking a 2500+ to 200MHz?
- Mushkin 3500 lvl1, what chips?
- aerocool dp-102
- Modding a Cable modem due to overheating on a 3M line
- Noob HSF Question
- Beginners overclock guide?
- 9700pro OC and cooling
- ZM80D vs. TtGiant3?
- RadioShack Paste isn't cutting it?
- Help on best configuration
- Copper and aluminum Question anamoly?
- St00pid Question
- overclocking my 2.4b c1 sl6ef question
- Thermalright SLK-900a vs Thermaltake silent boost heatsink
- Stange issue with overclocking CPU and running RAM at stock speeds
- My PC3200 and NF7-S get here this week..
- whats best overclocking mobile athlon xp
- Where to buy sandpaper for lapping a HSF?
- Anyone want to help the idiot with a tornado and temp sensors....
- another "how do I get more from my cpu" thread
- irony in memory cooling
- heres a good question: will overclocking the agp bus increase preformance
- arctic silencer
- Fan for SLK-947u?
- PC expert Breaks Thru The Intel O/C Barrier
- Neo BackPlate, SP-97
- North Bridge Passive?
- Weird artifacting
- How to remove old arctic silver from BGA chips?
- 3500+ overclocking help?
- Low-ish profile decent but not [H] HSF?
- AS5 question
- 200 x 2-2-2-11 or 215 x 2-3-3-11
- Overclocking
- Prime85 and voltage
- is my pc's heat ok
- Taking a heatspreader of an FX-53
- CM Wavemaster Owners "Post your Temps Thread"
- kimwipes
- CPU overclockability Question
- help- will this work?
- Best 1u HSF?
- Quiet 90mm HSF?
- Which is better (noise doesn't matter): Tt K8 Venus 7+ or Zalman CNPS7000A-AlCu?
- Applying Thermal Paste to Processor
- What is a Good Temp
- Can't understand tempature readings...
- help me past my wall
- trying to oc an old old board
- what do you guys think of the ALX-800?
- PlusView1000AMG Paint Time
- 3.2c @4ghz -SP94
- Heat sink/spreaders for RAM, useful??
- How does a Peltier work?
- what the heck is going on here?
- What's the CFM on the lian-li pc-61 case fans?
- O/Cing the A64 3000+
- OCZ memory booster?
- Issues with OC'ing p4 2.4a presscoot.
- matx mobo for overclocking
- P4 3.0C overclock problem on IC7-G
- Suggestion on heatsinks/fans?
- nForce2 and tRAS
- Vcore voltage problem
- heatsink/fan for Athlon XP
- Solve my Anomaly.
- Faulty fan causing reboots?
- Volt mod results
- clockgen for PIII?
- LGA 775 cooling questions
- Getting Memory and FSB even
- Anyone with a Tornado please help. ? about molex connectors.
- Am I just lucky??
- thermalright 948u
- My CPU Fan is way too noisy!
- My new Twinx 3200XL PRO came in today :)
- Quietening Case
- OMFG 3.4E @ 5.2GHz mad o/c!!!
- CPU temp very low with the Gigabyte K8NSNXP-939 and Athlon 64 FX 53?
- AthlonXP 2800+ OC on Air?
- Good PCI exhaust fan - worth it?
- Best 120MM Fan EVER?
- AMD 64bit 3200+ with no juice
- Overclocking FX5500
- Coolbits not keeping ettings
- Blame the psu?
- 120mm vs 80mm case fans: sound pitch and dB?
- Temperatures in a Prescott 2.8E?
- What's better?
- Proper TIM application? (nanotherm pcm)
- FSB or Memory Timings?
- 6800 GT cooling solution or PNY cooling stink!
- Fan tails?!?
- 4 80mm fans not providing enough cooling to processor what should I do?
- I'm not truly [H].....
- Need Help Picking Out a Kit??
- Chipset Fan Madness
- how to run 2 programs of prime
- Is my 3.0c at it's max?
- Video card overclocking GPU or RAM which gives more gains??
- Fan Question
- fx53 overclocking
- Removing Excess Thermal Pad around GPU
- at 220mhz now...stupid board wont go farther...need a volt mod
- Cooling down my p4 2.4c
- Will this setup OC well?
- Fan filters?
- Screwey task bar @ 255 fsb
- Question: CPU/FSB/MEM oc problem
- How long does Arctic Silver last?
- Volcano 7 & Mobile AXP
- So I found out why my NF7-S chipset runs so hot.
- sticky temperature thread?
- temperature program?
- Can't get this thing past 3 ghz!
- Odd Overclocking ram results
- Overclocking P4B-533 w/ Inel 3.06 and Corsair 333xms
- Ocing no temps...
- Oh I wish I had water cooling..
- All other things being equal....
- Problems reaching FSB of 233 on Asus A8V w OCZ 3700EB
- x800Pro or 6800GT for O/C?
- Prime95 Troubles
- Need A New P4 Heatsink
- old thread where guy used case fans with at power supply?
- Worried about cpu temps...
- Taisol CMK702151A thoughts
- Do I have enough cooling?
- Which CPU fan is bettter?
- Modding my 9600XT? some advice...
- How do I OC my 9600XT? New to this :)
- vantec stealth whine?
- my fans are loud!
- Poor P4S800D-E peformance?
- NB Cooler for P4
- Zalman 7000CU vs Thermaltake Venus 12 for AMD64
- heat and freezing
- Removing GT cooler to apply AS5
- how these temps look? Bad, eh?
- Finally got it working right.
- Idle temps around 45C and full load around 60C....hot?
- Overclocking problem
- Oh Man!!!!
- Do "Name Brand" RAM sinks make any difference?
- Next Gen (X800 / GF 6800) and VGA Silencer
- Good temps?
- CPU/Memory ratios?
- Cooling my New Video Card
- Anybody tried OC'ing a P4EE yet?
- What the!?
- How to run my RAM at PC2700???
- need design input for new system monitoring utility
- which is better for overclock, keep memory at 1:1, or use another divider?
- Anyone else hate the stock p4 hsf?
- is the alx-800 a good hsf for 2500+m @ 3200+ speeds?
- does case fans make a difference in oc'ing?
- How to test the 'look' of case airflow...
- Thermal paste keeps getting pushed off
- Some case colling questions
- What's a good Heatsink and fan for an abit kv8 pro mobo?
- rifle bearing VS ball bearing
- Darn, voltage really affects heat..
- Quick overclocking question.
- Why when i set my ram to 5:4 this happens?
- do i need a new heatsink and fan or only a new fan?
- My very first attempt at overclocking
- Chipset cooler for MSI K8N Neo platinum
- Help! don't know which cpu heatsink/fan to buy!
- Recommend me a HSF for my P4.
- Thermalright SLK 900A or ZALMAN CNPS7000A-Cu
- will this cpu hsf work?
- Zalman 7000a and AMD
- Help me overclock my 2.4c higher
- oh crap, what did i kill this time?
- first time overclock needs help
- 80mm Case fans
- switched motheboards and now processor won't function properly
- Help!
- My computer is nuts
- Should I take back this 3.0c????
- A64 running at 61 celsius... some advice?
- i finally hit 10,000+ MIPS in SiSoft Sandra (56k ~150kb)
- k, so how exactly do i oc...
- SK-6 on Barton 3000+? Also, AN7 errors?
- does the 2400+ mobile have the same oc'ing capabilities as the 2500+ m?
- Cooling plan...... Feedback welcome
- Temperature Monitoring Freeware?
- AMD 64 basic o/c - FSB/memory speed?
- System won't detect fan speed
- Prescott 2.4 A overclocking results!
- Old AMD guy needs Intel help
- Best OC I can get,
- SLK-948U Installation help!
- Zalman 7000cu or Silent Boost
- hs/f and mobo compatibility question
- Noisy Rheostat
- Most silent HSF
- PC Facelift for the Q3/Q4 releases
- The new Artic Cooling NV Silencers will be available...
- This falls under Cooling
- A few questions to ask for cooling!
- cooling help needed
- Getting Desperate...
- looking for a heatsink
- Is this a good heatsink/fan?
- 2.8c overclock, quick voltage question
- over clockin~
- Problem after overclocking
- My 1700 OC'd at 28.C!!
- CPU/Video Card Cooling suggestions
- getting higher multipliers on a7n8x
- Prime 95 lasts ZERO minutes
- What grit sandpaper do you use to shine your cpu?
- n00b ??
- will stress testing harm my computer?
- will this order of oc'ing my 2500+ xp mobile work?
- 2500+ at 3200+ fails, more voltage?
- how do i read from speed fan?
- sp-94 people
- Any 3.5 Fan Controller without PWM?
- prime95 no workie?
- VGA Silencer blowing air the wrong way!
- Discussion: Overclocking the A64 on the MSI K8N Neo Platinum
- will this work in place of a conductive pen?
- OCZ Memory Booster (VDimm up to 3.9 volts!!) | Anyone have one? Does it work?
- Dynex Thermal Grease
- PCI/AGP lock on A64 boards?
- Building a *silent* computer
- Artic Silver working great??!??!
- **beta** Oc Faq
- Replacement HSF for P4 423
- Rediscovering the lost art of AthlonXP overclocking
- Intel thermal compound
- Abit AV8 Cooling Issues
- 6800 Waterblock available
- KHX 3000 2x512 Users READ!
- 2.8C or 3.0C tough choice.
- Attaching heatsink to southbridge
- Need Help OC'ing my Amd
- this thing is killing me.. too hot!
- New Radeon 9800 Causes XP-M Stability Problems
- How do i take off old arctic silver paste?
- If you were shooting for your max OC which P4 would you use?
- I'm stumped. Can't seem to OC this 2.4C.
- system WAAAY too hot. Can't fix cooling...
- Looking for quietest fan setup: Pent or Athlon better to buy?
- Memory Latency
- i just corrupted my windows install with too low memory timings???
- First Overclock
- Help me OC my RADEON!
- will it die?
- whats better?
- Dual Channel Overclocking Woes
- External HDD Fan
- Celeron D or AXP??
- Overclocking my Pentium 4 2.53 GHz -- Where do I start?
- IC7-MAX3 owners read this.
- Which 3.0C 30 capper to get?
- Just Got a Mobile 2500 -- Need Some Help
- Which bios to put flash my 9500pro with?
- Cpu speed
- Finally, new PC Gear! + Questions..
- Heatsinks & Thermalpads
- should i use the little circular pads that came with my heatsink?
- Zalman Fanmate
- Great, cheap electronics website. Heatsinks, resistors, wire management, paste.....
- silver thermal paste
- AMD Athlon 64 3200+....heat sink
- Quick Question
- Overclocking a Dual 500MHz P3
- Question about heatsink weight...
- Fsb / Multiplier quick question
- Need a good case for new system
- What happened?
- Overclocking Results...?
- amd 2500 barton
- It's the heat.
- cooling needed to take 2500+m to 2.8 ghz?
- Ram Spreaders
- Measuring a fan?
- Quietest 40mm Fan?
- Need some help with advanced settings in BIOS..
- Windows hates Overclocking!!
- Best 80mm fan
- VGA Silencer Rev3
- Heatsink Problem
- Some heat issues
- Semi quiet/high performance CPU cooler
- I need advise on the P4 2.4C...
- agp frecquency
- Abit An7 OWNs! (2600+M @ 2.8Ghz)
- What can I do with this PC? Accident bid from EBay.
- NewCastle Temps
- random restarts
- What are people thinking?
- athlon xp-m at 58c load is this ok?
- Moving back to air cooling...
- I need help on choosing a HSF :)
- Overlcoking has no effect..
- Help, 5:4 FSB:RAM won't work
- what should the vcore be for my oc'ed 2500+ mobile?
- if i apply the same thermal compound twice, do i have to clean the first layer off?
- Zalman 7000B
- Hmm I think this might be my CPU...
- Overclocking the 6800GT
- Best AMD cpu/mobo for OC'ing and Linux??
- a64 newcastle 3200 on order, question
- win2k holding me back...
- sleeve bearing fan question
- VGA Silencer Question
- What do you think of the CM Dual Storm DDF-S81-U1
- XP-M overclocking - Is it the RAM? (Corsair)
- rate my new temperatures....
- help! can't get system to be stable
- Please help me with overclocking
- Need some 3.2C voltage suggestions
- Oc P4 2.4b
- Do all Bartons come locked now?
- Another How-To Questions
- Better XP-M for overclocking?
- What are some good 80mm case fans?
- Socket 939 Heatsink
- What's it called when you.. sand your heatsink.
- please help with RAM/CPU choise (533MHz vs 800MHz)
- Overclocking my 2500+ and stability testing
- My 3200+ @ 420fsb, switch to mobile?
- solution for multipliers > 12.5 with mobiles...
- Arhlon64 stock heatsink
- heat sink advice
- My space heater really is a space heater!
- My quiet+performance cooling. Really Cheap custom fan shroud, 120 sucking off the CPU
- Does the SP-97 Heat Sink need to be lapped?
- Good Aircooling for A64
- Need some help with OCing my rig
- My XP2600+ non barton
- p4 quad fsb, what does it do
- Fan Controllers?
- arrggg having stablity problems on my 2500mobile, very disappointed...
- Which case one has better cooling... and overall better?
- Can I use a SLK-947U on a Athlon64?
- Issues with O/C 2200+
- 120MM to 2x 80MM fan converter???
- Overclocking 3200+ on A7N8X
- Hot Opterons!
- Playing with OC'ing my laptop..
- PSU in the top of the case or the bottom?
- Barton 2800+ @ 2.5Ghz
- How do I know if the multiplier is locked?
- How much of an OC should I expect out of a Athlon 64 3000+ revision CG on a SLK-948u?
- High high should I be able to take this baby?(2500+)
- Finally Overclocked~ good results
- Testing overclocks, Prime fails but passes 3dmark (10loops)
- Which heatsink for A64 3200+?
- Best CPU cooling software
- Anyone ever heard of everest ?
- is 1.7vcore dangerous?
- Best NF7-S HSF
- Weird temps goes up to 207F with load
- stock amd64 3000+ heat issues
- Strange OC problem
- Are 70mm to 80mm fan adapters out there?
- Pin Mod question
- MOBO temps
- AMD Newcastle 3200+ Heatsink needed
- Understanding Bench Scores - Need Advice
- I want to overclock my cpu and videocard... Please recommend a heatsink/fan for me
- ocing a 2600 mobile
- Overclocking an AMD 2500+
- Thermalight SLK-900A -- Will it work on my socket 478 motherboard?
- XP3000+ Overclock
- Which is hotter? FX-53 or Prescott?
- What is the best BIOS for the ABIT NF7-S V2.0?
- over clocking prob with a 3.0 pressie
- About to change cooling....Shin Etsu vs AS5?
- Site with specific mobo settings?
- Intel 925X vs Intel 875P - Which is the right way to go?
- Got my P4 2.8C to 3.5 GHZ, Wont go past, need advice
- To HT or not to HT
- GT Overclocking and Nvidia demos
- Athlon64 overclocking question
- What do you guys think about these 120mm fans?
- Koolance with Athlon 64
- I am officially cursed.
- AC cooling
- 3.2g@ 3-4-4-8; 3.58g@ 2-2-3-5 ????
- A64 Sensor Question
- Bearing types
- ThermalTake Silent Boost and NF7-S v2
- A7N8X-E Deluxe FSB overclocking results
- Sorry for the pathetic Question but new to this
- Redneck cooling
- Airflow q.
- lapping my northbridge heatsink
- Texas ppl
- Abit Ic7
- NF7/NF7-S users, please respond..
- Which NF7-S bios do you use?
- Where's the A64 3000+ O/C guide?
- Overclocking Ram Problem.
- heat problem..or cd
- Does Epox 4SDA5+ have AGP/PCI lock???
- what is THE BEST 80MM fan??
- gf4 bios editing
- Oc an intel northwood p4 3.2
- Help needed with OC old P4 1.8A
- 2600+ M a 100% reliable OCer?
- Opinions and comments on a 2500+
- need help with vid card cooling (ati tool)
- Anyone have any Temp programs for nVidia cards?
- Quiet Xeon Cooling
- PLEASE help me with this ram...
- Any experience with the Enermax UC-12FAB 120mm fan?
- swiftech H20-8600-A
- Need help with my panaflo fans
- Best HSF for Athlon 64 (Socket 754)
- Should I clip or bolt my SLK-984U?
- New axp m 2600 question fsb/ram ratio
- should i solder?
- The Quest for higher FSB - MOSFET Cooling?
- Dealing with voltage increases?
- is setting my ram voltage at 2.8 dangerous?
- New NF7-S rev2 BIOS = whole new world of OC
- Cannot get past 220mhz FSB
- Which direction for air? (PICS)
- Overclock brick wall with 2.4c?
- Problem with Overclocking a amd 2500+ mobile
- mobile pinmodding
- Is using Arctic Silver Dangerous?
- Overclocking with the Athlon 64 3200+
- Maybe you can make some sense of it
- I guess i can't overclock my ram?
- Need help overclocking AIW 9800 Pro. Please Help.
- Overclocking newb
- "Safe" HSF?
- 3.4EE VS. FX-53 -- Overclock and Heat
- OverClocking help
- Overclocking 2500 mobile on Abit KD7
- 59x0 overclock/mods
- Good ram with tight timings, good for high FSBs?
- Zalman 700cu
- video card o/cing confusion
- Time for a new power supply?
- What to hold thermal probes down with?
- Best heatsink for 3500+ with MSI Neo2?
- Too Hot?
- Need Help: Where to start when OC FX-53
- CPU temp readings incorrect?
- what to do from this point?
- please help! ran into a brick wall during my o/c attempt
- unable to overclock
- Will this case work good for what is in my Signature?
- Help, good RAM can't even hit 205mhz
- ThermalTake Heatsink?
- IC7 Max3 OC ??
- P4C800 E-deluxe volt mod links plz
- Best overlclocking memory
- Help me figure out a good NB cooling solution that fits!
- Uhh... need help installing SP-97 with Thermaltake Xaser III Case
- OC for my Radeon 9800 non pro
- Reboots from overheat?
- When are the new VGA silencers coming out?
- L12 Mod QUESTION
- a8v overclocking!!!! problem 8(
- FanLess Psu
- Help a noobie
- 2 ?'s, which 92mm fan and which thermal paste to use?
- is there a bug with prime95?
- Program like PowerStrip?
- An7 Overclocking And Dual Ram
- sandra says my fsb is too high, but it is at 133
- CAS Latencies (HELP)
- HTT + Multiplier question
- i need some quick help
- What mobo is best to oc a 64 3200+
- Corsair XMS memory problem.
- problems getting FX-53 to 2600 MHz
- Thermalright, worth it?
- Is 70º for my CPU too high?
- OCZ ram volter?
- sleeve bearing fans
- OC graphics memory.
- voltage for AMD 350)+ processor...
- Need your opinion.......
- Sucking or blowing with a heatpipe heatsink
- Best way to clean heat sink and apply thermal paste?
- New Case, Temp. Help Please!
vBulletin® v3.8.2, Copyright ©2000-2009, Jelsoft Enterprises Ltd.